Eturnity Heating Expert – an all-in-one planning, quotations and customer management solution


For simple consultations, quotations and planning of heating systems


Book appointment

Eturnity Heating Expert – an all-in-oneplanning, quotations and customer management solution


For simple consultations, quotations and planning of heating systems


Book appointment

The Eturnity Heating Expert

The heating installer puts in a lot of time and effort in the initial contact with the customer until the heating system is installed. Coupled with unfriendly offers that use confusing technical terms that customers may not be used to, heating systems installers can miss their target.

This is where the Eturnity Heating Expert comes in, reducing this time expenditure by up to 80% and ensuring up to 30% better implementation rates with its offers and consulting tools geared to the customer’s completed project.

The advantages of the Heating Expert

Combination of different system components
Consultation with the Eturnity Heating Expert allows the combination of different heating and hot water system components - from solar thermal collectors, simple and intelligent thermal storage systems to heating systems.
Product components of different system components
The component library of the Eturnity Heating Expert integrates heaters and thermal storage units from a wide range of manufacturers. The component library can be extended with individual components and prices.
Professional simulation of heating and hot water systems
Based on the building and consumption data of your customers, the Eturnity Heating Expert will calculate the specific heat and energy requirements for you and clearly depict the current and future energy flows.
Automatic calculation of future costs
With the Eturnity Heating Expert, you can automatically create a cost comparison between current and future heating systems for your customers. They will receive information on the annual maintenance costs, energy costs and the long-term savings they will gain. The calculations are based on parameters defined by you.
Creation of attractive offers
The offers that you create in the Eturnity Heating Expert are exported as PDFs and are aimed at the end customer, with explanations about the new heating and hot water system that are easy to understand. Your customers will feel that they have been understood. We can implement your individual design ideas.


Comprehensible offers

Your offer in an attractive design

The many points and pieces of information of an offer can also be prepared in an elegant way. Many of our customers are particularly enthusiastic about this functionality, which results in customer satisfaction and clear information to be provided automatically.

The following before-and-after comparison shows what this can look like.


example-heating-proposal-not-customer-friendlyoffer-heating-eturnity-better-design
Move the slider to see a complete comparison
Statements

This is what our customers say

  • logo-customer-eturnity-ampenova-sv
    With the Heating Calculator integrated as an iFrame, customers can get a realistic initial consultation on the costs and yields of various heating technologies directly on our website, which makes the subsequent consultation process much easier for us and is a valuable service for the customer.
    Pascal Postler
    Ampenova GmbH
  • logo-customer-eturnity-energie-fuers-klima-sv
    With the Eturnity Heating Solution, I can show my customers the efficiency of different heating technologies in a simple and understandable way, making the consultation process even more customer-friendly.
    Gerald Bischof
    HGB Thermoheat GmbH
  • The presentation of the offers is clear and not too overloaded. Additionally, PDF pages can be included or removed, which makes the program even more dynamic.
    Kevin Büsser
    Energie Zürichsee Linth AG


How much does it cost?

Our packages and price structure

We will be happy to advise you on your personal ideas and the costs of the Eturnity Heating Expert. The initial consultation is free of charge, our customer advisors look forward to getting to know you and your company to provide help tailored to your needs.



Heating Expert and Calculator

Heating Expert and Calculator - the perfect overall solution


The first contact is crucial for potential customers. They want advice that relates to them and experience immediately why the heating system is the best for them. Consequently, many energy and installation companies decide to integrate automated lead generation and filtering by implementing the Heating Calculator directly on the website.





FAQ about the Heating Expert

What kind of map material can I use?
We offer the following map material for the following countries: Switzerland: Google Maps as well as Swisstopo map material can be used. Germany: Google Maps and orthophotos. Austria: Google Maps and orthophotos from Basemap.
I cannot create a project because the address is not found
Unfortunately, we have no influence on the regularity of Google Maps updates. However, there are some workarounds for missing addresses.

1. Open Google Maps separately. Find the building for which you want to plan an interpretation and right-click on the building. Then click on "What's here?" and add the corresponding address in the Solar Expert.

2. Try entering the address of the building next door or a street next door. You can then switch to the desired building in the map section. The PDF always shows the building for which the modules are marked. You can then easily correct the customer address in the "Customer" tab.
Can I deposit the amounts of the annual operating costs?
Yes, you can define the annual operating costs as a percentage of the initial investment costs or as a fixed amount per kWp of the system. These settings can be made under "Profitability". For the battery, the annual operating costs are stored as a fixed amount. Please let us know the desired annual amount if you want to change it.
Can I adjust the electricity price development?
Yes, you can adjust this on a project-specific basis under "Profitability". If you would like to adjust this as standard, we would be happy to do this for you. To do so, send us an e-mail with the desired values.
What is the internal rate of return (IRR)?
The internal rate of return (IRR) shows you the interest rate at which your clients' investment in the project theoretically earns interest. In business administration, this is often a value used to assess or compare the attractiveness of projects. The IRR is then put into the context of current interest rates of other investments, e.g. on a savings account. If you get a negative IRR, it would mean that the investment is not paying off for your clients.
What is the opportunity cost?
The opportunity cost represents the rate of return on the investment alternative. This is needed to calculate the IRR. The opportunity cost represents the interest rate your clients would receive if you "invest" the investment capital in a bank instead of investing it in the PV system.
Can I store the waiting time for KLEIV/GREIV and how does this flow into the intervention calculation?
The waiting time is not taken into account in the simulation. The KLEIV/GREIV is deducted directly from the initial investment costs.
Is the energy demand of the heat pump taken into account when calculating the degree of independence/self-consumption?
Yes, if the corresponding consumption profile with a heat pump is selected, a "non-intelligent" heat pump that simply runs when heat is needed is taken into account.


The Eturnity Heating Expert is supported by:


We consult you

Your personal advisor

We will be happy to answer your questions, just get in touch with one of our customer consultants.


We consult you

Your personal advisor

We will be happy to answer your questions, just get in touch with one of our customer consultants.

Fabienne Kallmeyer

Vertriebsleitung für D & AT& Marketing

+49 (0) 7543 989 29 632


Michael Langerwisch

Kundenberatung - AT

+43 (0) 72 051 89 46



Nous vous conseillons

Votre conseiller personnel

Nous sommes à votre disposition pour toute question complémentaire.

Kevin Berset

Conseiller clientèle Romandie

+ 41 77 520 50 15



Nous vous conseillons

Votre conseiller personnel

Nous sommes à votre disposition pour toute question complémentaire.

Christophe Heriau

Responsable clientèle france

+33 6 13 61 01 48


Daniele Saracista

Développeur Commercial

+41 81 511 54 86



We consult you

Your personal advisor

We will be happy to answer your questions, just get in touch with one of our customer consultants.

Doris Frehner

Head of Business Development

+44 121 790 07 30



We consult you

Your personal advisor

We will be happy to answer your questions, just get in touch with one of our customer consultants.

Daniele Saracista

Business Developer

+41 81 511 54 86



We consult you

Your personal advisor

We will be happy to answer your questions, just get in touch with one of our customer consultants.

Adam Czulinski

Customer Manager Sweden

+468 22 87 18


Doris Frehner

Head of Business Development

+46 8-121 114 766


We consult you

Ihre persönliches Kundenberatungsteam

Roger Sutter

Division Manager Sales & Marketing

+41 77 520 50 17


Quentin Thepot

Berater Mittelland und Jura

+41 77 509 76 69


Severin Müller

Berater Nord- und Zentralschweiz

+41 77 529 84 03


Gabriele Caputo

Berater Ostschweiz und Tessin

+41 77 470 59 60


Our blog

News from the heating industry